We all know that the Yaesu FH-1 / FH-2 can be easily built at home using some tactile switchesn and resistors.
Here is the PCB with ground plane:
Eagle board and schematic: http://s000.tinyupload.com/index.php?file_id=01007025175296412571
Here are the recommended resistor values, you can rearrange the buttons as you like:
Slighly modified PCB:
This image is 1500 dpi, print it accordingly (use irfanview for example).
Toner transfer method pcb result:
SMD Switches soldered, and done:
Final transparent case with the cable:
Works really well on my FT-991. Now I only have to find a use for the DEC and P/B buttons…